Brake operational test (1) Drive vehicle jeep and test for proper brake action.
Tell us about your vehicle to find the right parts faster.
(3) Raise the axle into position until the spring seats in the upper mount.
If necessary, refer to Group 25Emission Con- trol Systems service for additional information.Front-END raised towing If a vehicle cannot be towed from rear, front-end raised towing method normally can be used.API Service Grade specifications also apply to energy conserving engine manual oils.5 Axle Fill Plug LocationTypical lubricant viscosities FOR anticipated temperature ranges 0 - 20 lubrication AND maintenance.Remove the stabilizer bar.If the noise stops or changes greatly, check for insuf- manual ficient lubricant.Engine AIR cleaner filter element maintenance schedule With normal driving conditions, engine air cleaner filter element should be replaced: Light-Duty Cycleafter each 48 000 km (30,000 miles) interval has elapsed Heavy-Duty Cycleafter each 38 000 km (24,000 miles) interval has elapsed When vehicle is operated.A black- light detector can be used as an aid in detecting source of coolant leaks.Booster battery warning: TO prevent personal injury, DO NOT allow battery acid TO contact eyes, skin OR clothing.(5) jeep Install drain hole plug (Fig.DO NOT attempt TO jump start AN engine before checking condition OF BAT- tery acid.Frequent short trip cherokee driving less than 15 miles (24 km).All service vehicles have reminders printed on the instrument panel below fuel gauge and on fuel filler door. Inspection It is recommended that serpentine drive belt be routinely inspected for cracks, fraying and excessive wear.
The information service should be read from left to right, starting with line 1 at the bottom of the plate up to line 7 (as applicable) at the top of the code plate (Fig.2).
Connect the track bar to the frame rail bracket.
If oil pressure does not increase, stop engine immediately and determine cause of malfunction.
(7) Add specified quantity of new engine oil at fill hole location on top of engine cylinder head cover.
It is the owners responsibility to determine appli- cable driving condition.
These, and all other maintenance services in- cluded in this manual, should be performed to pro- vide the best vehicle performance and reliability.
7,500 miles (12 000 KM) OR AT 6 months Check engine coolant level, hoses and clamps.(3) Install the upper grommet and retainer on the stud in the engine compartment.Also, refer to Fluid Capacities chart.Add fluid, if necessary.(6) Connect the battery positive cable and then the negative cable to the battery.Lights/electricaltest all electrical systems in vehicle for proper operation.Methanoldo not use unleaded gasoline blended with methanol.
The VIN 1994 jeep cherokee service manual pdf contains 17 characters that provide data concerning the vehicle.
Severe driving conditions are defined as: Frequent short trip driving less than 24 km (15 miles) Frequent driving in dusty conditions Trailer towing Extensive engine idling Sustained high speed operation Desert operation Frequent starting and stopping Cold climate operation Commercial service Fig.
The propeller shaft angle has priority over caster.